Evcon Air Conditioner Price and Typical Installation Cost 2026
Evcon air conditioner price varies by unit size, SEER rating, and installation complexity; buyers typically pay between $1,200 and $6,500 for the unit plus labor and materials. This article lists Evcon air conditioner price ranges, per-ton estimates, and the main drivers of the final price to help U.S. buyers plan a budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Evcon Condensing Unit (1.5–2.5 ton) | $700 | $1,200 | $2,000 | Lower SEER, basic model |
| Evcon Condensing Unit (3–5 ton) | $1,200 | $2,200 | $4,000 | Higher capacity, mid SEER |
| Full Replacement Installed (small home) | $1,800 | $4,000 | $6,500 | Includes new evaporator coil, labor |
| Major Retrofit / Commercial | $4,500 | $9,000 | $18,000 | Multiple tons, duct work, permits |
Typical Total Price For Replacing An Evcon Condensing Unit
For a straight condensing unit replacement of an Evcon split-system, homeowners usually pay $1,800-$4,200 installed for 2–3 ton systems; smaller 1.5-ton jobs can be $1,400-$2,800 and larger 4–5 ton systems $3,500-$6,500. Average national installed price for a standard 3-ton Evcon unit is about $2,800.
Assumptions: standard single-family home, normal access, matched evaporator coil where needed, mid-SEER model, Midwest labor rates.
Line-Item Pricing: Materials, Labor, Equipment, Permits, Delivery
This breakdown shows the major parts of a typical Evcon replacement quote and the ranges contractors commonly list.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $700 | $1,700 | $4,000 | Condensing unit, coil, filters |
| Labor | $400 | $1,200 | $2,500 | Typical 4-12 hours |
| Equipment | $50 | $200 | $800 | Vacuum pump rental, gauges |
| Permits | $0 | $75 | $350 | Local mechanical permit |
| Delivery/Disposal | $50 | $150 | $500 | Old unit disposal, freight |
Materials and labor typically make up 80%–90% of the final invoice for an Evcon AC job.
How Tonnage, SEER Rating, And Coil Matching Change The Quote
Tonnage: 1.5–2.5 ton units add $700-$1,800; 3–4 ton units add $1,200-$3,000; 5+ ton commercial units add $2,500-$6,000. Choosing 3.5 vs 4 ton can shift the unit price by $400-$900.
SEER: Basic 13 SEER Evcon units are in the low range; 16 SEER or higher increases unit cost by about 10%–30% depending on features. Assumptions: higher SEER often requires upgraded coil and controls.
Coil Matching: If the evaporator coil must be replaced or modified, expect an extra $300-$1,200 for coil matching and labor; mismatched components can increase failure risk.
Site Conditions That Add To The Evcon Installation Price
Hard-to-access rooftops or long line-set runs add measurable cost: rooftop crane or rigging $400-$1,500; additional line-set length over 25 ft costs $4-$9 per ft. More than 30 ft of new refrigerant line typically adds $200-$700 to the job.
Duct repairs or major electrical upgrades (subpanel, 240V circuit) add $500-$2,500 depending on scope and local code requirements.
Practical Ways To Reduce Evcon Air Conditioner Price
Buy the right capacity: oversizing increases upfront price and reduces efficiency; undersizing causes comfort issues. Choose a matched coil and avoid unnecessary high-SEER models if budget is the priority.
Other cost-saving tactics: schedule installs during shoulder seasons (spring/fall) to avoid peak pricing, get 3+ written quotes, remove old unit yourself if permitted, and bundle with furnace replacement for labor savings.
How Prices Vary By Region And Climate For Evcon Systems
Southern states and hot climates typically pay 5%–20% more for installation labor and higher-capacity units than cooler northern states. Expect about a 10% premium in coastal urban areas compared with rural Midwest pricing.
| Region | Typical Installed Range | Delta vs National Average |
|---|---|---|
| Southeast / Sunbelt | $2,500-$5,500 | +5% to +20% |
| Midwest / Rural | $1,800-$4,200 | -5% to -10% |
| West Coast / Urban | $2,800-$6,500 | +10% to +25% |
Three Real-World Evcon Quote Examples With Specs
Example 1: Small home swap — 1.5 ton Evcon 13 SEER, matched coil, 6 hours labor, normal access. Total $1,750 ($700 unit + $600 labor + $150 equipment/disposal). Good for small 800–1,200 sq ft homes.
Example 2: Average replacement — 3 ton Evcon 14 SEER, coil replaced, 10 hours labor, permit. Total $3,200 ($2,200 unit + $900 labor + $100 permit). Typical single-family 1,800–2,400 sq ft.
Example 3: Major retrofit — 5 ton Evcon commercial split, new duct tie-in, rooftop rigging. Total $9,200 ($4,500 unit + $3,200 labor + $1,500 equipment/permits). Applies to multi-zone or commercial projects.