Best Automatic Urinal Flush Valves: Touchless Solutions for Modern Restrooms
Automation is reshaping public and commercial restrooms by improving hygiene, reducing waste, and simplifying maintenance. This guide highlights five top automatic flush valves that fit common urinal setups, from modern retrofit kits to sensor-operated models. Each product blends reliability with energy and water efficiency, helping facilities stay clean and compliant. Below is a quick snapshot of the selected options to help you compare at a glance.
| Product | Brand | Type | Key Benefit |
|---|---|---|---|
| Zurn ZERK-CPM AquaSense E-Z Flush Retrofit Kit | Zurn | Retrofit | Touchless upgrade in minutes |
| American Standard Ultima Selectronic 6063051.002 | American Standard | Electronic | Programmable sensor with self-cleaning piston |
| American Standard Ultima Selectronic 6063013.002 | American Standard | Electronic | Low 0.125 GPF option |
| Zurn ZERK-CCP E-Z AquaSense Kit | Zurn | Retrofit | Quick install under 3 minutes |
| Sloan EBV-500-A Exposed Side Mount Retrofit | Sloan | Retrofit | No-hands operation with override |
Whether upgrading a single stall or outfitting a whole facility, these models emphasize touch-free operation, predictable flush volumes, and straightforward installation. Review the specs below to determine which meets your flushing requirements, water goals, and maintenance expectations.
Zurn ZERK-CPM AquaSense E-Z Flush Retrofit Kit
The ZERK-CPM retrofit kit replaces a manual valve with a touchless sensor system, improving hygiene by eliminating touch points. Installation is described as quick and straightforward, and the kit is designed for long-lasting service with minimal maintenance. The upgrade aligns with facilities seeking to modernize urinal controls without a full valve replacement.
American Standard Ultima Selectronic 6063051.002
This battery-powered, touchless valve uses a self-cleaning piston and a programmable sensor for easy customization. It includes a long-life 8-year CR-P2 lithium battery and a pressure compensation feature to maintain accurate flush volume across varying inlet pressures. It’s suited for facilities prioritizing hygiene and water efficiency in busy restrooms.
American Standard Ultima Selectronic 6063013.002
Designed for urinals with a 3/4-inch exposed top spud, this model emphasizes touchless operation to minimize germ spread. It arrives with an 8-year battery and offers reliable performance in medium-traffic restrooms, balancing sanitation with consistent flush volumes.
Zurn ZERK-CCP E-Z AquaSense Kit
This complete retrofit kit upgrades manual flush valves to touchless sensors, promoting improved hygiene by removing contact points. Quick under-3-minute installation is highlighted, making it a practical option for rapid restroom updates in schools, offices, or healthcare facilities.
Sloan EBV-500-A Exposed Side Mount Retrofit
The Sloan EBV-500-A retrofit converts existing flushometers to touch-free operation with a battery-powered infrared sensor. It includes a non-hold-open manual override, enabling a full flush when needed. The side-mount design supports a seamless upgrade for various urinal configurations and maintains a reliable flush sequence.
Buying Guide
Key purchase considerations help determine the best automatic flush valve for urinals across different environments:
- Sensor type and timing: Decide between infrared, capacitive, or piston-based systems. Consider whether you need immediate response, adjustable delay, or staged flush cycles to balance hygiene with water use.
- Water efficiency and flush volume: Compare available GPF (gallons per flush) settings and whether the unit supports low-flow options (e.g., 0.125 GPF) for high-traffic facilities and code compliance.
- Power source and maintenance: Battery-powered units reduce wiring needs but require battery life considerations. Some models offer long-life batteries (up to 8 years) or require connection to a building power supply.
- Retrofit compatibility: For existing restrooms, evaluate retrofit kits vs. full valve replacements. Retrofit options should fit standard urinal spuds and spacings without extensive remodeling.
- Hygiene and maintenance features: Features like self-cleaning pistons, anti-clog design, and accessible service points help reduce maintenance costs and downtime.
- Installation time and complexity: Quick-install kits minimize restroom downtime. Look for “under 3 minutes” install claims and clearly documented installation steps.
- Ruggedness and environment: Consider vandal resistance for high-traffic public restrooms and models designed for humid or chemical exposure environments.
- Warranty and support: Check the warranty length and availability of replacement parts to ensure long-term reliability.
- Control options: Some valves offer programmable sensors and easy calibration to tailor flush behavior for different user patterns and occupancy.
- Compliance and accessibility: Ensure the unit meets local codes and accessibility guidelines, including reach ranges for sensor placement and manual override options where required.
Across these options, choosing a touchless urinal flush valve generally centers on hygiene benefits, ease of installation, water savings, and lifecycle maintenance. Retrofit kits are well-suited for rapid upgrades, while full electronic valves offer advanced programming and longer service life for busy facilities.